US Numeric Size
Waist
US Denim Size
Hip
Chest
Widen your Next Gen Everest Wildtrak, Trend, Sport and Ambiente with these 40mm Poke Flares. These flares help minimise body poke on your aggressively offset wheels. These Flares come without sensor mounts to suit NON Platinum models. They come painted matte black, but can be painted to the colour of your choice if need be.
Please beware of cheap eBay flares which are made from brittle plastic and cracks/ breaks with a few stones hitting them. Flares need to be able to flex to withstand our Australian roads.
Please note: Factory Ford Everest Next Gen offset is +55.
If you live in Melbourne, we offer installation services for all our products and welcome local pick up.
Please reach out to us for more information or advice on what set up you may need.
Suitable for:
– Ford Everest Next Gen 2022+. Fits the following models: Wildtrak, Trend, Sport and Ambiente
Package contains:
– 6 x 40mm flares (Front and Back)
– 2 x Front Bumper Flare pieces
– 1 x piece screw/ washer/ U- Nut pack
DIY skill level:
– Moderate-Difficult. Allow 2-3 hours and if in doubt, professional installation is recommended.
– We recommend for Next Gen Ford Everest flares to follow the below procedure
1. Remove Front Standard Front and Rear flares
2. Remove all factory scrivets, replace hole with U-Nut
3. Loosely mount the flares on and loosely tighten the Screws to allow for movement and adjustment
4. Peel the edge of the Double Sided Tape so when you have found your desired position, you can remove after
5. heat the double sided tape to allow for better adhesion and fitment. Use a heat gun or a hairdryer. Note: Do not overheat the tape or you may melt the flare!
6. Peel the tape, then tighten the screws.
Please do NOT wash the car or drive in the rain for 24 hours to allow a proper finish.
make | |
---|---|
model | |
year |
Reviews
There are no reviews yet