US Numeric Size
Waist
US Denim Size
Hip
Chest
Give your NF VW Amarok a new look with a set of Front and Rear Flares. made from durable ABS plastic, and gives an extra 30-35mm of poke to fit wider wheels and protect your body. Made to give a subtle, OEM look and are finished in Matte Black. These flares can also be painted to the colour of your choice.
This kit is suited for the Core and Life models which don’t have a sensor on the front bumper. However, as the front flares are two pieces, you can install on any model if you have already fitted a Bullbar.
Beware of eBay flares made from cheap and brittle plastic which crack after a few stones hit them! These flares are flexible, not brittle.
If you live in Melbourne, we offer installation services for all our products and welcome local pick up.
Please reach out to us for more information or advice on what set up you may need.
Suitable for:
– 2023+ Volkswagen Amarok NF Next Gen Core, Life (no sensor)
Package contains:
– 4 x mm flares (Front and Back)
– 2 x Bumper Flare pieces
– Screws/ washers/ U- Nut
– Mounting kit
DIY skill level:
– Moderate-Difficult. Allow 2-3 hours and if in doubt, professional installation is recommended.
We recommend to follow the below procedure when installing flares:
1. Remove all factory scrivets, replace hole with U-Nut
2. Loosely mount the flares on and loosely tighten the Screws to allow for movement and adjustment
3. Peel the edge of the Double Sided Tape so when you have found your desired position, you can remove after
4. heat the double sided tape to allow for better adhesion and fitment. Use a heat gun or a hairdryer. Note: Do not overheat the tape or you may melt the flare!
5. Peel the tape, then tighten the screws.
make | |
---|---|
model | |
year |
Reviews
There are no reviews yet